Getting hot
Hello guys. First I must say thanks for all the help Ive gotten so far fixing my first PSD. The other day, not pulling anything, I was heading up a an incline and noticed that my temp was really...
View Article2000 7.3 over heating
The gauge says it's hot. So took it to a shop they replaced thermostat radiator sending plug and pulled injectors and checked the cups. They said they wanted to pull the head. But I said no and picked...
View ArticleGear swap?
Anyone put 373 in a 2011 f250 yet. I put bigger tires on and was thinking of changing the gears
View Articleintermittant issues, this is a big one
'04 F250, 110K miles, I just changed the oil (rotella T-6) and all filters this past weekend, yesterday while driving into town my truck lost acceleration when I attempted to advance after a stop sign....
View ArticleEGR delete question
Have old edge that supports dpf removal would it also support egr delete? Also have a coolant filter and was wandering if anyone has hooked it up to the ports were the dpf coolant lines were removed....
View ArticleBatteries
Does anyone have any preferences on a brand of battery for our powerstrokes Sent from AutoGuide.com App
View ArticleGetting back into a SD , 2005 , any advice ...
I'm going to go look at a 2005 F250 , 5.4 , manual , work truck pkg with A/C. 83300 miles In other words , a plain janer. Any known issues to look for on these gasser motors and whatever else? Manual...
View ArticleStrange Oil Leak????
Got a pretty good oil leak on the top of my motor some were. Its enough that I had to add oil as it was below the line, and I just changed the oil a month ago, and its running down both sides of the...
View ArticleNeed exaust help!!!
I have a 99 7.3 and I'm thinking about putting a in front of the rear tire exaust but I have no clue how to do it any suggestions?
View ArticleAnyone had issues with Bulletproofing?
I have a bone stock 03 6.0L with 230K miles that needs injectors and some other minor work. The mechanic said he sees no signs of head gasket failure but I was wondering should I get the HG and studs...
View ArticlePossible HPOP?
I got my truck running after chasing a bad icp, ipr uvch and pcm (so I was told) got her back running and has been driving good for the last couple weeks untill a couple days ago. The truck runs fine...
View ArticleFuel Filler Neck
Has anyone replaced their's yet? Rusted out and leaks while fueling. I found the part just looking for advice on the replacement. Thanks!
View ArticleIcon Lifts - who has best price?
I have a Rize lift that I hate and am going to swap it out for an Icon 7" Stage 2. Who has the best price? + No tax and no shipping? Thanks!
View ArticleAir/less than a 1/4 tank of fuel
Hi all - I've had a dodge forever and finally got rid of it got a 1984 3/4 ton 2wd Ford 6.9. I really like it but I need to tell you a story. I bought it and its got pretty low mileage. 88k. The person...
View Article2012 f350 stall?
I got my f350 brand new couple months ago I now have 2k miles and today at a stop light the battery like came on and the oil light and the car wouldn't move. I shut it off and turned it back on and...
View ArticleF-350 4x4 DRW Camper Package Question
When you order the Campers package for the F-350 under the options added. Do you also get the 7 pin wiring and connector installed or just the wiring to the area where the connector would be installed....
View ArticleWhere to install the 'T'
I purchased a coolant filter for my 6.4. The instructions say to insert the 'T' fitting into the heater hose on the passenger side which is before the heater core. A while ago, I purchased the...
View Article87 f250 build!7.3 idi advice?
This is my first experience with this motor and it runs good. 80k on motor. I paid $800 for the truck with a 95 bed and cab. The body mounts need redone, new floor plates need put in, a new hood and...
View ArticleClik here to view.
What is this handle on the fuel tank?
What's it for? Looks like it'll catch on something and break/rip a hole/do something bad:
View ArticleTransmission Temperature?
What is the operatering temperature of the 4r100 transmission? Where is the temperature measured? (going in or out)
View Article