Turbo removal
Holy cow! What a pain in the @#$!!! And knuckles! I'm 2 days into it and still don't have those bolts loose. I got the two easy ones, can't budge the low one at the back, and can't find an s-shaped...
View Articleloosing power on hills, starving for fuel
my 99 7.3 acts like it is starving for fuel going up hills. it only does it on 1/2 a tank of fuel or less and starts after 15 or so miles into a trip. I can pull over shut it off for a couple of...
View ArticleDisc pad ears rusting onto bracket
I have found the disc pad ears rust onto the caliper bracket. Then freeze up. So the pads are good but I develop squeaks due to binding. The fit is tight between the bracket and the ears. Is it just me...
View Article6.0 with micro crack in heads
Has anyone still used there head with the micro cracks in them
View Article8v92TA Question
I have an 8v92TA (1990 ) in a Prevost motor coach. My motor block is bad (due to the rod sticking out the side), but everything else is good. I have found some military 8v92 and these military motors...
View ArticleElectrical woes
I have a 99 F250 4x4. The hi/lo heater/AC switch works intermittently. Hit a bump goes off hit a bump comes on ( not all the time ). Last time was off for about two weeks. Got stuck in wet grass went...
View ArticleMuffler or not
Hi, I'm in the process of building a 4'' straight piped and mandrel bent system , and as i have spare pipe i thought i would build a system with the muffler on as a spare, so if I'm not happy with the...
View ArticleTorque converter not locking up
I have a 2000 7.3 with many mods. It just recently developed a P1747 code along with the SES light, and the OD light is blinking and the torque converter does not lock up. Am I to understand that the...
View ArticleService Dept Recommendations
Hey Guys, I'm new here, but I've been lurking a lot and learning a lot. Great place to be! Wasn't sure where to post this, but this seemed like the most general place. Anyways, I recently purchased a...
View ArticleClock/radio always on
In the last couple of days I've noticed that the digital clock is always on whether the ignition switch is on or off. Then yesterday I got to a diner, turned off the truck but the radio remained on....
View ArticleClik here to view.
Hunter Edition Ford F150 with custom leather and wood interior
Exterior upgrades on a truck look awesome, but you don't really see them while you drive. From this prospective - interior upgrades would make a difference for you. We came across one of the most...
View ArticleDP F5 Tuner questions
I emailed Jody, and got a fast reply, but I've got some questions, and didn't want to bug him,:lol: he replied with these tunes for my truck and setup, (see my mods in my sig, except will be adding a...
View ArticleICP decreases while running/ warming up, then runs horrible, hard hot start
I assume this is indicative of a seal warming up and leaking more. I tried injecting air in ICP sensor port. I hear air in both valve covers. It seemed worse toward back of driver side with cover off...
View ArticleCummins JUMPING
Found an Awesome Video on youtube, i thought you guys might like! https://www.youtube.com/watch?v=52ZDOK7cNrM
View Article2013 F-150's BLOW OUT
I have about 9 2013 F-150 Crew Cab FX-4 Appearance Package that I will sell way below to move them off the lot. My loss is your gain. I have all colors available. If you are looking for one. Please...
View Article02 f250 low oil pressure
I have an 02 f250 with 156000 on it, the oil pressure gauge reads (at the L mark) all the time,idle or driving. Put a manual gauge on HOP res in the plug next to the oil pressure switch, gauge reads 35...
View ArticleThanks to all !
I simply want to thank you all. I had problems when it was time to start the engine 30 minutes after I stopped it.... It was air intrusion. I'm not a mech, just a computer technician but explanations...
View Article'94 7.3 idi turbo won't turn over
ok my truck started and ran fine yesterday. now today I go to start it and it just clicks a single time. the relay and the solenoid on starter are new... any ideas?:ford:
View ArticleFull delete and Intake help!!!
Hey y'all, I'm looking to do a full EGR delete and DPF delete with an intake but with so many brands out there which ones are the best bang for my buck? I'm doing it on a budget so i can't go all out...
View Article