Headlight question
why is it that some headlights are like this http://www.2040cars.com/_content/car...175943/001.jpg and other headlights are like this https://encrypted-tbn0.gstatic.com/i...BwPLLueX0b4WRA ?
View Article2008 6.4 problems
Just bought a 6.4 last week it has 170,000 on it it runs great. The wrench light came on and I got it tested at AutoZone and it came up with low injector pressure truck starts and drives just fine....
View ArticleClik here to view.
Running Board Mounting Spot
Hey guys, So the spot where you mount factor running boards is all rusted to hell and there is a big hole in the front mounting location. What am I looking for here in order to fix? Attachment 46474...
View ArticleCatalytic converter
Hey all back on the hunt for surging issues. Was told my catalytic conv may be clogged up. Early 99. I have one. Most don't. While looking the pipe In front of it is cool and in back is cool but...
View ArticleTurbo grenaded
A few days ago my turbo on my 07 F250 blew up internally. I brought it to the mechanics shop and without taking it apart yet they told me the turbo basically turned into shrapenal. So definatley...
View Article1996 F250 keeps blowing Maxi 17 fuse
we have disconnected the fuel bowl heater, replaced glow plug relay, pulled all fuses that are associated with the maxi 17 and attempted to start and it still blows the maxi 17 fuse. Any suggestions on...
View ArticleBad injector cup question
Hey all, I have a 2002 7.3 that has bad injector cups as it filled up the anti-freeze with diesel fuel so I stopped driving it a couple months ago and it has been sitting. My questions is will the...
View ArticleAccessory racks in 5th wheel mounting holes?
Hi, I'm looking at several 2015s, about ready to pull the trigger. I've been ignoring any trucks that have the fifth wheel prep package, because of the pre-drilled holes in the bed. But then I got to...
View ArticleUpgrading OEM Fog Lights
Several years ago I added a front hitch receiver to my 02 for a winch. I removed the stock fogs but would like to replace them. Are there aftermarket lights that can use the stock harness? If not, how...
View Article97 f250 Axle identification problem
hey guys i have an issue. I have a 1997 F250 4x4 7.3L. I am not to familiar with these trucks. so this is the problem. My tie rod ends are wore out and are needing to be replaced. Im pretty sure i have...
View ArticleThe TRUTH about K&N filters
To those of you who are running K&N air filters without or with turbo, when you installed your k&n ,,, was there REALLY a noticeable difference? I have 2 of them installed on 2 different gas...
View Articleleaky valve cover
I have an oil leak coming from the rear outside corner of my pass. side valve cover. I installed a new valve cover gasket and that did not fix it. I inspected the valve cover and put a straight edge on...
View Article2000 7.3 no start, no smoke
2000 power stroke that was running rough during initial startup, but quickly smoothed out and ran great. Parked and has set for two weeks and will not start. No smoke out tail pipe. Dad popped a small...
View Articlenewbe
I'm new, just bought a 1991 f250, 7.3 idi, 4x4 5speed. ill have a ton of questions. very excited
View Article14 or 15?
I am in the market for a new 350 DRW or 450. There are a few 14's left in my area but they are getting harder to come by. Is it worth paying a few extra bucks and getting/ordering a 2015 or should i...
View ArticleHUGE HUGE BLOW OUT SUPERDUTY SALE JULY 10th.
If you are looking for a deal on a 2014 give me a call July 10th. HUGE BLOW OUT SALE SAVE THOUSANDS... LOWEST PRICES IN THE US. NOTHING TILL THEN.
View ArticleTie rod end ?'s
Okay so I found tie rods at orileys now I just don't know if master pro is a reputable brand. Any takes on them? Personal experience with them? Also these are the part #'s Also all the outer ones...
View Article2011 Tranny seal leak- back motor?
Took my truck into a Ford Quick Lane for an oil change. They recommended servicing the transmission for a seal leak on the "back" motor. I've made an appointment with the service dept to fix it. I'm...
View ArticleHigh pressure oil gauge
My high pressure oil sensor grounds tru the isspro gauge after the engine is heat soaked. Any ideas? Isspro sent me a new gauge last year after calling them. That did not solve the problem. Have not...
View ArticleFS: DiabloSport Predator 6.0L Powerstroke Tuner
Bought for my truck that I recently sold. Never actually installed the tune. $230 shipped to your door.
View Article