VVT Actuator
Hi all - Had the truck in for an alignment after I just did some front end work... anyway, the shop left a note at the bottom: VVT Actuator Stick & Leaking Oil Won't get a chance to ask them what...
View ArticleFuel pressure at 10psi?!?
So I've been chasing a very low power issue these last few weeks. I ordered an isspro fuel pressure gauge and installed it the other day. I started the truck and it ran absolutely horrible and the fuel...
View Article2008 Manual Transmission Fluid XT-M5-QM
I'm looking for Manual Transmission fluid for my 2008 F250 Super Duty. My owners manual calls for XT-M5-QM. I can't seem to find any for sale online but I can find XT-M5-QS. Will this work? Or, do you...
View Article33 Row cooler for 7.3
Has anyone used the Doorman 33 row cooler at O'rielly's for $289 on the 7.3? Thoughts on quality / fit compared to the 5C3Z-7A095-B? It's considerably cheaper for something that is brand new and has...
View ArticleTie Rod Question
Hey Everyone, It's been a while since I've posted on this site, but am in need of some tie rod install help. I've been installing all new Moog tie rods on my truck and have ran into a road block. They...
View ArticleClik here to view.
BNIB - BD 7.3L CCV Kit
BD Power 7.3L Crankcase Vent Kit - Still brand new in the box Asking $250.00 + shipping PERSONAL SALE - CASH OR PAYPAL ONLY! Attached Thumbnails   Â
View ArticleClik here to view.
New guy here with coolant Q's and pics. Experts please chime in
ello everybody ,I got a real nice 94 IDI van and had some coolant questions. My plan was to flush with distilled , add fleetrite green conventional coolant, and add some fleetguard DCA4, and do 60/40...
View ArticleNew to me '99 F350
Hi all, I just picked up a early '99 F350 long bed CC SRW w/ 250k miles on it. The truck is mainly used to haul a 2600# cab over while towing a 24' Bayliner w/ ~750 - 1000lbs tongue weight. My overall...
View ArticleHellllllpppppp
05 6.0 The usual no start when hot, will start fine when its cold..... High IPR %, low ICP pressure when hot. When watching my pids and its doing this I quickly remove ICP sensor and do air test and...
View ArticleClik here to view.
Hitch plate installed
Just got this done last week. I have a 20 ton 30' tag trailer with air brakes I'm going to pull with it. The pintle is a 50 ton with air cushion and the receiver is a class 5. Air glad hands are on the...
View ArticleClik here to view.
Overhead CB radio installed
The CB is just a basic small radio. Fits nicely in the overhead console. It's hooked to a firestick mounted in the bed. Use a gearkeeper mounted to the rearview mirror for the microphone. The spots on...
View ArticleMicro Refinery - eBook
Turn waste oil, plastic and tires into diesel fuel / Autark / Self-sufficiency - YouTube Turn waste oil, plastic and tires into diesel fuel / Autark / Self-sufficiency - YouTube
View Article08-10 6.4L Info needed
Unfortunately my beloved early 2000 7.3L will likely be totaled after we were involved in an accident last weekend. I'd already been eyeing the '08 - 10's after reading in my Diesel Power magazines and...
View ArticleGeneral Diesel Questions
Hey guys, Just turned 16 and purchased my grandpa's '97 diesel F250. I have a few questions for ya. Is it OK to run the engine pretty hard every once in a while? I hate running things hard and I feel...
View ArticleLatest Turbo Oil Feed and Drain Tubes?
If I order the current parts from AutoNation for these will they be the updated versions? (even if I search parts with my VIN?) Thanks!
View ArticleI have a question about my fuel pump
someone has told me that my fuel pump does not use 12 volts to power it. the pcm sends what ever volts it needs. does anyone now if this is true?
View ArticlePossible Transmission Problems??
Hi Guys, I'm brand new to the forum. I have a 2006 F250 6.0 that I just purchased with 55k. It has a 6 inch Pro Comp Suspension Lift and 38" A/Ts. I bought the truck with 52k and bought an extended...
View ArticleMore on Cetane booster -specifically PM-22-A
Disclaimer: I use PM-22-A in my truck. Thought you folks might be interested in these videos. Although the videos are specifically about Ford's PM-22-A, I would think the information would apply to all...
View ArticleClik here to view.
Not sure what to make of this...
I was looking at the front rotors of my 2008 Ford Super Duty and saw this. Both sides are the same. It looks like a dust seal but its not retained. Is this how it should be? Also, what amount of 'out...
View ArticleNew to TDS
I have read threads from this site in the past and found them helpful for problems with my F250. Not so much the case today. I am sitting in Great Basin National Park, Baker NV with a dead F250. I have...
View Article