2006 Transfer Case Fluid? What kind?
Wondering what fluid I should use in my 2006 f350 6.0 tansfer case? I've got 137k miles on the truck and I don't think it's been done since the 60k service. There seems to be lots of debate on this...
View ArticleExhaust back pressure readings.
I've got an 03 excursion with a 7.3 Recently it seems that it won't make over 10-12psi of boost. Also seems the mileage is worse and doesn't seen to have the power it did. This kinda all happened over...
View ArticleDP Tuner F5
Sold the truck but removed the tuner beforehand. It's an F5 with blue numbers. 1= Stock 2= 60 hp economy 3= 80 hp economy 4= 40 hp tow 5= Decel tune 6= 80 hp tow $175 obo Located in 80132
View ArticleNew guy from somd
Hello, This is my first diesel. Needs some fixing up. First thing will be to replace the fuel return hoses. Air is getting into the fuel. After its started, runs good. Where's the best place to get...
View Articlehelp - Transmission Problem
Hello names Brian I have a 1993 f350 with the 7.3l IDI I'm having some trouble with my trans the OD light is blinking and was when I bought the truck about three weeks ago and when it shifts from 1st...
View ArticleWho's running the TS chip??
I'm curious about the opinions of those running the ts 6 position chip. What mods are you running and what position on the dial is your favorite and why? I just ordered my chip, can't wait to install it!
View ArticleGreenhorn
New on the forum, past lurker. Considering a 2013 F350. Lot's of great information on this forum. Thanks!
View Article2003 F250 CC Stereo
Hey, Well I have a 2003 F250 CC and am having a hard time finding any info about upgrading the sound in this beast. I wanted to add a sub/amp, but I can't find any room in this truck. Anybody have...
View ArticleLift Recomendation
Looking for opinions on a 4" lift for the excursion. I have a superlift ~2" - 3" I think on it now. It is a 01 7.3, 4x4, with 33' tires. I know there are mods on certain code superduty spring I can do....
View Articlep0101 code
2008 H&S delete with AFE intake. Wife was driving truck last week and check engine light came on. I checked for a code on my tuner and found P0101. I pulled the MAF. It did not look dirty but...
View ArticleLow to no boost
04 F350 6.0L 220000 Kilometres Strait pipe 4' turbo back to 6" stack Cold air intake Edge evolution Chip Hopped up built aluminum tranny with a tough tow shift kit 6" lift 35" tiers Problem: Next to no...
View Articleinjector o-ring
I believe i have a bad o-ring on one of my injectors. When i change out my glow plugs will there be any tell tail signs on them indicating which injector has the bad o-ring?
View ArticleFuel starvation and how to tilt the bed on '01 F-250
I've been fighting a fuel starvation issue on my 7.3. After sitting for a while it runs fine under light load and even in short bursts of hard acceleration, but a long hard pull (for example from a...
View ArticleClik here to view.
Fuel filter question
While working my engine issues, I decided to change the fuel filters, they look pretty dirty (picture 1) I noticed that the upper filter bowl has a plastic piece in the center that "looks" broken. The...
View ArticleClik here to view.
2WD F350 ball joints tutorial, part 1
I had to replace the driver side ball joints on my F350 today, and figured it'd be a good topic for a tutorial. So, here goes. The first 2 pics are a rough idea of the tools you'll need. It's not a bad...
View Articlequestions with upgrades from air filter to power chips
ok i have a 1997 f250 crew cab 4x4 automatic with a 7.3 engine I have 367000 miles on the engine and my tire size is 235/85r16. so here are my questions 1 I want to gut my cat so I went to napa...
View Article4 Months of Reading, questions without answers
Howdy all, first post here after reading for the last several months. I started off my search looking for a work truck. I own a gardening company and I'm also an Extension office Master Gardener so I'm...
View ArticleEarly 99' hub upgrade ?'s
I'm finally gonna upgrade my front hub assemblies. In searching the web for hubs I have found many different styles within Timken alone. I've looked on here and haven't been able to narrow it down....
View ArticleSCT Transmission Strategy
Hate to add another tuner thread...but here goes. For those of you with these tuners, what kind of torque converter lock up are you getting? I hate how the stock tuning leaves the converter unlocked up...
View Article