Can we buy a oring/seal set for the standpipe/dummy plugs or do we have to buy the whole standpipe? I have read about new stile pipes, are they redesigned pipes or just new oring seals?
I just ordered an IPR removal tool and the adapters to do a air pressure test on the high pressure oil side. Is it possible to tell if a leak is coming from the ICP or the STC. I understand that an air leak under either side valve cover is a problem on that side, could be multiple things, but it will be on that side. Not sure if you can tell a difference between an IPR or a STC leak.
If I have to go under the valve cover would it be advisable to replace all orings on all stand pipes/dummy plugs/ injectors while I'm in there? I replaced oil and EGR cooler one week ago today. Possible trash got to the IPR??? What do ya'll think?
2005 F250 6.0L
Thanks
Mark Brown
I just ordered an IPR removal tool and the adapters to do a air pressure test on the high pressure oil side. Is it possible to tell if a leak is coming from the ICP or the STC. I understand that an air leak under either side valve cover is a problem on that side, could be multiple things, but it will be on that side. Not sure if you can tell a difference between an IPR or a STC leak.
If I have to go under the valve cover would it be advisable to replace all orings on all stand pipes/dummy plugs/ injectors while I'm in there? I replaced oil and EGR cooler one week ago today. Possible trash got to the IPR??? What do ya'll think?
2005 F250 6.0L
Thanks
Mark Brown