After a 5 hour drive my 96 E350 did not start (engine was hot and just shut down for 10 minutes) When I turned the key I heard a clicking but the starter did not engage. The engine temp and water in fuel ligt came on. I drained 2 spoons of water out of the filter. After waiting 4 hours the engine started fine.
The first start of the next day my display showed for a few seconds CErr and than 0 and the engine started fine. The second start of the day with a warm engine. after turning the key my display showed immediatly 0.
Why is there a different indication between the first and the second start?
Also when the engine did not started I pulled all fueses and they were all ok.
Any idears? starter has 40.000 miles and 6 years.
Thank you for your feedback
Bernie
The first start of the next day my display showed for a few seconds CErr and than 0 and the engine started fine. The second start of the day with a warm engine. after turning the key my display showed immediatly 0.
Why is there a different indication between the first and the second start?
Also when the engine did not started I pulled all fueses and they were all ok.
Any idears? starter has 40.000 miles and 6 years.
Thank you for your feedback
Bernie