I replaced my HPOP and double and triple checked everything to ensure it was connected. It came with a pre installed STC fitting that was already within rig (double checked with supplied jig). After replacing it I did not put any oil in the cavity nor had any idea on how to prime the system. Spent a good 5 hours cranking it on and off obviously giving time for the starter to cool off. it was hooked to a battery charging cart all day even failed. You can hear the pump cavitating and pushing through the air in the line and laboring pretty heavy. It started once and did reach a self sustaining point. This is my daily driver and i need to get it going please help
↧