First time here and need help the truck is driving me nuts, changed the primary and secondary fuel filters today and did the cycle all ran fine then ran out of fuel. Figured maybe the new o ring did not seat well so opened it all up and started over. End result the pump kicks on, the primary along the frame rail seems to be filling but not the secondary on the top of the engine. Tried filling it and after several attempts the engine finally started pulling from the secondary filter but the primary still is not flowing through. Opened it up and had a helper cycle the key see a few bubbles right at the start but thats about it.
Am I missing something or could it just be a karma that a sensor or something so happened to give at the same time? Did check all fuses and batteries are brand new.
My thoughts at this point is maybe debris got into the line somehow but can not find a diagram of how the fuel flows for this vehicle.
Am I missing something or could it just be a karma that a sensor or something so happened to give at the same time? Did check all fuses and batteries are brand new.
My thoughts at this point is maybe debris got into the line somehow but can not find a diagram of how the fuel flows for this vehicle.