I had work done to my truck to truck to include hgs, studs, egr delete. I got it back and was getting to boost codes. I took it back to my friend to have my turbo rebuilt. He put a new unison ring and a rebuild kit in due to end shaft play (side to side, not in and out).
Now I seem to be low on boost, but not power. I run a small programmer, edge evo on lowest setting. Pulling my camper before i would get about 27-29 psi. I havent tried to pull my camper yet, but just empty I can only get it to boost to 19-20 floored, but it doesnt seem to be low on power. I dont remember exactly what it boosted before empty, but i thought it was more than 19. My mechanic said he used a smoke tester and didnt see any leaks. Any ideas?
Now I seem to be low on boost, but not power. I run a small programmer, edge evo on lowest setting. Pulling my camper before i would get about 27-29 psi. I havent tried to pull my camper yet, but just empty I can only get it to boost to 19-20 floored, but it doesnt seem to be low on power. I dont remember exactly what it boosted before empty, but i thought it was more than 19. My mechanic said he used a smoke tester and didnt see any leaks. Any ideas?