So I ran into a hiccup. My fuel pumps are threaded for m12x1.25 and my check valves are m12x1.5! ****!
Any tips? It would take me like 4 adapters at 10 bucks per to link the two together plus lots of connections that are unnecessary...
I don't think helicoils will make a good seal, time Serts MIGHT.... I've never attempted to re thread something without drilling larger and the port on the pump doesn't have much room to go up in size.
This is the only thing holding me back here, not a major deal there's many courses of action to remedy but advice on best way would help! Attachment 38873Attachment 38881
Sent from AutoGuide.com App
Any tips? It would take me like 4 adapters at 10 bucks per to link the two together plus lots of connections that are unnecessary...
I don't think helicoils will make a good seal, time Serts MIGHT.... I've never attempted to re thread something without drilling larger and the port on the pump doesn't have much room to go up in size.
This is the only thing holding me back here, not a major deal there's many courses of action to remedy but advice on best way would help! Attachment 38873Attachment 38881
Sent from AutoGuide.com App