Everything works every time except full floor. I have the auto system with blend doors and after a while when the truck heats up, it gets stuck between either defrost/floor or vent/floor. It wont go to full floor, even when you choose full floor manually. Ford says all electronics are good, so they now want to tear the dash apart and check to see if everything is good inside or sticking. If you play with it long enough, it sometimes works, but rarely. PIA when you have heat blowing out the vents all trip.
How big of a job is it to tear the dash apart without risk of breaking all the tiny tabs holding it together? Can I do it or know of any shops good at it? I'm in the lower mainland, Vancouver and not sure I trust the local dealer to "experiment" at $110/hr. They have not had it happen before and now want to tear it apart and "see".
How big of a job is it to tear the dash apart without risk of breaking all the tiny tabs holding it together? Can I do it or know of any shops good at it? I'm in the lower mainland, Vancouver and not sure I trust the local dealer to "experiment" at $110/hr. They have not had it happen before and now want to tear it apart and "see".