Already have my TC on a switch, was wanting EBPV on a switch of its own. I have searched with not much help. All I find is the all in one switch. I was wondering if I could take the 2 wires that go to the EBPV valve, run them inside to a DPDT switch. Hook the 2 that go too the valve on the center terminals, the two that go to the PCM to one side and a hot and negative too the other side? That way switch in center would be off, say switch left would be auto to PCM, switch right would be manually closed. Does the PCM send 12 volts out, or will sending 12 volts to the valve hurt anything. Thanks alot for any input I can get.
↧