Putting in my new up pipes from Riffraff. Instructions are straight forward, and since I've been in that far before removal went well. My question is on the install. First off the instructions provided don't specify the torque on the bolts, top and bottom for the bellow pipes. Also, since the turbo and pedestal came out for this job, I got the turbo reinstall kit that has the EBPV solinoid plunger rebuild "o" rings, but no instructions how to do it. Has a new clip for the rod and everything. Its cold here so it gets used and I would like to do it while Im in there. Anyone know how to do this, and the bolt torques?
↧